Module 1.2 - Data Quality - Standards

     This week's module involved determining the positional quality of two Albuquerque road networks against the city's aerial imagery. This module follows the procedures outlined by the National Standard for Spatial Data Accuracy (NSSDA). 

 

   The blue road network was sourced from the City of Albuquerque Planning Department, and the red road network was sourced from StreetMap USA. The red points are randomly chosen StreetMap USA intersections. Corresponding intersections in the city's planning dept. dataset and aerial imagery reference were mapped as well.

   In order to determine the horizontal accuracy, I first divided the study area into four quadrants using the Subdivide Polygon tool. This was necessary in order to obtain an ideal distribution of 20 test points as outlined in the 1999 Positional Accuracy Handbook by the Minnesota Planning, Land Management Information Center. After digitizing these points, I used the AddXY Tool to add the X and Y values to the three attribute tables. These tables were then exported using the Table to Excel conversion tool and entered into the Horizontal Positional Accuracy Statistic Worksheet.

     Using the National Standard for Spatial Data Accuracy, the City of Albuquerque Planning Dept. dataset tested 14.2 feet horizontal accuracy at 95% confidence level. Using the National Standard for Spatial Data Accuracy, the StreetMap USA dataset tested 163.8 feet horizontal accuracy at 95% confidence level. 

Module 1.1 - Fundamentals

     The first lab of this course focused on determining horizontal and vertical accuracy and precision of GPS-collected waypoints. Accuracy was defined as the subjective closeness of a database representation of an object to the true value, and precision as the consistency of the measurement method (Bolstad, 2022).

   Horizontal accuracy and precision were determined to be 0.8 m and 4.3 m respectively. Vertical accuracy and precision were determined to be 6.04 m and 0.14 m respectively. In this module accuracy was calculated by using the distance between the average waypoint and the reference waypoint. The precision was determined by analyzing the distribution of 68% of the waypoints around the average waypoint using buffers horizontally, and the attribute table vertically.

Module 6 Part 2: Least-Cost Analysis

 

    This post focuses on the Least-Cost Analysis part of the module. We were given 3 criteria to work with for this study area: Distance to road, elevation and landcover. To obtain the Road Suitability, I used the Euclidean Distance Tool and the Reclassify Tool. To obtain the elevation and landcover suitability rasters, I used the Reclassify Tool. Then I used the Weighted Overlay Tool on the three reclassified rasters. Afterwards, I created a cost surface by inverting the combined raster layer using the Reclassify Tool. Then, I used the Cost Distance Tool twice, once for each protected area as a source. Finally, I used the Corridor Tool on the two coronado source cost distance rasters to obtain the corridor raster.

Module 6 Part 1: Suitability Analysis

     The last module of this course (Suitability and Least-Cost Analysis) will be split into two different blog posts, with this post placing emphasis on Suitability Analysis. This map layout compares two suitability scenarios, with each weighing 5 criteria differently. The 5 suitability criteria were Land Cover, Soils, Slope, River Distance, and Road Distance.

    The first 3 criteria feature layers were obtained using the Reclassify Tool, and the distance criteria were obtained using the Euclidean Distance Tool. The final rasters were obtained using the Weighted Overlay Tool. The Alternate scenario is greater in the 2, 4 and 5 suitability category areas, whereas the Equal Weight is greater in the 3 category. This is most likely due to the differing weights, as the Alternate Scenario places greater emphasis on the Slope criteria, and less emphasis on the Distance criteria.